![](/media/1zygzh3h/battery-health-monitor.png)
Battery Health Monitor
The Battery Health Monitor module is a critical component for assessing and managing the health and performance of batteries, whether in vehicles, electronic devices, or renewable energy systems. This module employs advanced diagnostics and monitoring techniques to track key parameters related to battery conditions.
The Battery Health Monitor module is a critical component for assessing and managing the health and performance of batteries, whether in vehicles, electronic devices, or renewable energy systems. This module employs advanced diagnostics and monitoring techniques to track key parameters related to battery condition, including state of charge (SoC), state of health (SoH), voltage, temperature, and charging cycles. In essence, the module continuously monitors battery parameters in real-time, providing up-to-date insights into battery health and performance.
How does it work?
The Battery Health Monitor module is designed to continuously assess and monitor the condition and performance of a vehicle's battery system. Equipped with sensors or probes connected to the battery terminals, this module collects real-time data on various parameters such as voltage, current flow, temperature, and state of charge.
Using this data, a central control unit within the vehicle analyzes the battery's health, evaluating factors like voltage stability, charge/discharge rates, and overall capacity. From this analysis, the module estimates the battery's state of health (SoH), indicating its remaining useful life and any signs of degradation.
If abnormalities or degradation are detected, the module generates alerts for the driver or operator, often displayed on the vehicle dashboard. Additionally, it may offer maintenance recommendations to optimize battery performance and prolong its lifespan.
By logging historical data and providing proactive monitoring, the Battery Health Monitor module ensures the reliability, performance, and longevity of the vehicle's battery system, ultimately enhancing overall vehicle efficiency and reducing the risk of unexpected failures.
Supported Devices
Here are the devices that support the integration of the Battery Health Monitor module.
![FMC130 4G M1 2G](/media/ad0pvquj/fmc130-4g-m1-2g.jpg)
Teltonika FMC130 for Fleet Intelligence
The FMC130 is a premium device (L65 x H56.6 x W20.6 mm) which is fitted in a non-intrusive manner to the vehicle. It includes a GPS and an accelerometer which enables the monitoring of the vehicle and how it is driven. In addition, the FMC130 with a CAN connector is able to read data directly from the vehicle such as fuel level, engine speed and distance traveled which enables advanced management. The FMC130 is used within the Efficiency, Safety, Compliance and Sustainability solutions.
Read More![FMC920 4G M1 2G](/media/ljgdqxtq/fmc920-4g-m1-2g.jpg)
Teltonika FMC920 for Fleet Intelligence
The FMC920 is a small device (L79 x H43 x W12 mm) which is fitted in a non-intrusive manner to the vehicle. It includes a GPS and an accelerometer which enables the monitoring of the vehicle and how it is driven. The FMC920 is used within the Efficiency, Safety, Compliance and Sustainability solutions.
Read More![FMC150 4G M1 2G](/media/laachspz/fmc150-4g-m1-2g.jpg)
Teltonika FMC150 for Fleet Intelligence
The FMC150 is a premium device (L65 x H56.6 x W20.6 mm) which is fitted in a non-intrusive manner to the vehicle. It includes a GPS and an accelerometer which enables the monitoring of the vehicle and how it is driven. In addition, the FMC150 collects data directly from the vehicle such as fuel level, engine speed and distance traveled which enables advanced management. The FMC150 is used within the Efficiency, Safety, Compliance and Sustainability solutions.
Read More![FMC640 4G 2G](/media/atshr2kj/fmc640-side-840xauto.webp)
Teltonika FMC640 for Fleet Intelligence
The FMC640 a premium device (L65 x H56.6 x W20.6 mm) which is fitted in a non-intrusive manner to the vehicle. It includes a GPS and an accelerometer which enables the monitoring of the vehicle and how it is driven. In addition, the FMC130 with a CAN connector is able to read data directly from the vehicle such as fuel level, engine speed and distance traveled which enables advanced management. The FMC130 is used within the Efficiency, Safety, Compliance and Sustainability solutions.
Read MoreImportance of Battery Health Monitoring
Battery Health Monitoring is crucial for several reasons, primarily in ensuring vehicle reliability, safety, and performance. Firstly, it provides early detection of battery issues and degradation, allowing for proactive maintenance and replacement. By monitoring key parameters such as voltage, temperature, and state of charge, Battery Health Monitoring helps identify potential problems before they lead to battery failure or vehicle breakdowns. This proactive approach minimizes the risk of unexpected battery-related incidents, ensuring driver safety and preventing costly repairs or inconvenience.
Secondly, Battery Health Monitoring optimizes battery performance and extends its lifespan. By tracking the battery's state of health (SoH) and providing insights into its condition, the monitoring system enables drivers and operators to implement best practices for battery management. This includes adjusting charging habits, managing temperature extremes, and scheduling maintenance based on the battery's health status. By optimizing battery usage, Battery Health Monitoring maximizes the battery's efficiency and longevity, reducing the frequency of replacements and overall operating costs.
Moreover, Battery Health Monitoring contributes to environmental sustainability by promoting efficient battery usage and reducing waste. By extending the lifespan of vehicle batteries through proactive monitoring and maintenance, fewer batteries need to be replaced, leading to reduced resource consumption and environmental impact associated with battery production and disposal. Additionally, optimizing battery performance helps minimize energy consumption, reducing the vehicle's carbon footprint and contributing to overall sustainability efforts.
Furthermore, Battery Health Monitoring enhances overall vehicle efficiency and performance. A well-maintained and optimized battery system ensures consistent power delivery to vehicle components, supporting optimal operation of electric systems, onboard electronics, and auxiliary functions. This improves vehicle drivability, responsiveness, and fuel efficiency, ultimately enhancing the overall driving experience and reducing operating costs for vehicle owners and operators.
In conclusion, Battery Health Monitoring is essential for maintaining vehicle reliability, safety, and performance. By providing early detection of battery issues, optimizing battery usage, and minimizing environmental impact, it ensures efficient and sustainable operation of electric and hybrid vehicles, contributing to enhanced vehicle efficiency, driver satisfaction, and overall sustainability.
Battery Health Monitor in Fleeto Management System
Below are the images that showcase the Battery Health Monitoring system in Fleeto
Battery Health Monitor Report
The battery health monitor report displays key parameters related to battery condition, including state of charge (SoC), state of health (SoH), voltage, temperature, and charging cycles.
Related Modules
![](/media/sppodgv1/fuel-level-monitoring.png)
![door_open](/media/g05dkrxd/fuel-level-monitoring.png)
Fuel Level Monitoring
The Fuel Level Monitoring module is designed to provide accurate and real-time monitoring of fuel levels within vehicles, machinery, or storage tanks. By integrating advanced sensors and telemetry systems, this module offers comprehensive insights into fuel usage, consumption rates, and remaining fuel levels.
![Door Lock Monitor](/media/34ocwzq0/door-lock-monitor.png)
![door_open](/media/jl4p5osc/door-lock-monitor.png)
Door Lock Monitor
The Door Lock Monitor module comes equipped with advanced sensors and monitoring capabilities, it ensures the security of your vehicles by detecting and reporting any unauthorized attempts to breach vehicle door locks. This module offers real-time notifications, allowing you to stay informed about the status of your doors remotely.
![Temperature & Humidity Monitor](/media/qw2ld12f/temperature-humidity-monitor.png)
![door_open](/media/edmhkm43/temperature-humidity-monitor.png)
Temperature & Humidity Monitor
The Temperature and Humidity Monitor module is designed to provide accurate and continuous monitoring of environmental conditions within a specified area. It combines sensors for temperature and humidity measurement, offering real-time data insights to ensure optimal comfort, safety, and preservation of assets.
![](/media/4m2cilsm/tire-pressure-monitoring.png)
![door_open](/media/kzmpb2qu/tire-pressure-monitoring.png)
Tire Pressure Monitoring
The Tire Pressure Monitor module is an essential component of vehicle safety systems, designed to continuously monitor the air pressure in each tire. Equipped with pressure sensors mounted on each tire, this module provides real-time feedback on tire pressure levels, ensuring optimal inflation and safe driving conditions.
Use Cases
The Battery Health Monitoring module provides valuable insights into the condition and performance of vehicle batteries. Here are some use cases:
![](/media/fgypsota/rectangle-4-1-min.jpg)
Electric Vehicles (EVs) and Hybrid Vehicles
Battery health monitoring ensures that the battery pack in electric and hybrid vehicles operates at peak performance levels. By monitoring key metrics such as state of charge (SOC), state of health (SOH), and cell voltage, the module helps maintain battery efficiency and prolongs battery life.
![](/media/vykhgryj/rectangle-4-min.jpg)
Personal Vehicles
By providing real-time data on battery health and estimated range, drivers can make informed decisions about trip planning and charging strategies, reducing the likelihood of range anxiety during long journeys.
![](/media/30tjnoip/rectangle-73-min.jpg)
Commercial Trucks and Vans
By monitoring battery health parameters, such as capacity loss or voltage irregularities, fleet operators can optimize vehicle performance, minimize energy consumption, and maintain uptime for delivery operations.
In Partnership with
![teltonika-img](/media/tfxc2wgn/teltonika-img-1.png)
![teltonika-img](/media/n3ln4da4/tomtom-1.png)